How To Use The Tree Mold

How To Use The Tree Mold

The surrounding tree mold is also known as the precast concrete tree pool cover plate mold. The local use is not consistent with the title. The editor makes a statistics here. There are tree molds, tree grate mold boxes, tree pool grate molds, etc. After the pouring and molding, it is mainly composed of four surrounding tree cover plates.

Its application mainly lies in the park, the beautification zone of the street and the beautification of trees in various venues. There are planned rainwater leakage holes on the surface of the cover plate mold, so that the cast tree cover plate can keep the roots of the tree loose and absorb moisture and other nutrients during the use of the tree, and maintain the soil and water loss of the tree. The process is also very convenient, just need to prepare release agent, concrete, shaking table, etc. The following editor will explain in detail the demoulding process of the surrounding tree mold.
1. After purchasing the surrounding tree plastic mold that needs to be used, the first requirement is to apply a layer of mold release agent to the inside of the surrounding tree mold before the mold is poured. The common demolding effect is good. For mold release, mold release agents that are commercially available can also be used for mold release. The release agent is attributed to the chemicals that need to be placed in a cool place after the end of use and the container containing the release agent needs to be sealed well after the end of use.

2. Pour concrete successfully assembled with cement and sand into the surrounding tree mold that has been coated with the release agent, and place it on the shaking table to discharge the air in the surrounding tree mold concrete after oscillation to allow the pouring to form The air content in the cement fence cover is reduced.
3. In the shady place where the oscillated tree mold is placed in a cool place, and the daily temperature in summer is relatively high, it is not necessary to perform the steam curing process on the tree mold, so as to avoid excessive steaming and the use of the cement tree cover. Finally, after the casted tree cover is placed on the oscillating table for oscillation demoulding, it will be placed on the side after successful demolding. If a single tree cover with the same color is used on the road, it will be a little shorter. Vivid, so after the production is complete, you can apply colorful and colorful paint to the surface of the cover mold, and it also looks more beautiful and vivid in appearance.

Plastic Mold
the authorPlastic Mold