The gantry CNC drill is named gantry because it looks like a door. The gantry CNC drilling is slightly larger than other drilling machines; compared with other drilling machines, the operation stability and working efficiency are higher. Its main features...

Through investigation and research, it was found that in the past, copper was often used to make touch fingers. In order to ensure the strength and rigidity of the touch fingers, it is necessary to make the touch copper plates...

Laser appeared in the practice of rapid prototyping technology earlier. It is a high-energy beam. There are many rapid prototyping technologies using laser as a carrier. After a long period of research and application, most of the concepts have developed...

Three-dimensional printing technology is a relatively advanced manufacturing technology that gradually began to emerge in the late 1990s. It has achieved outstanding results in research and has been widely used in the field of machinery manufacturing. The working principle of...

The electron beam rapid prototyping technology using electron beam as a processing heat source can not only prepare a three-dimensional structure of titanium alloy, but also have a great advantage in preparing porous structure materials. According to the differences in...

The function of the cut blank is to hold the parison and seal it during the blow molding process. The most noteworthy part when designing the cut blank is the margin left by the two pieces of mold. If the...

This type of shaping mainly relies on the compressed air introduced into the profile from the core die of the machine head. Generally, the air pressure reaches 0.02 to 0.1 MPa, so that the profile surface can be completely attached...

Plastic microporous film (microcapillary film, MCF for short) is a new polymer extrusion molding technology proposed by M.R. Mackley of Cambridge University in 2004. This technology transports the gas into a special extrusion die. After the melt leaves the die,...

What is an injection mold? The mold used for injection molding is called an injection molding mold. The plastic is heated and melted in the heating cylinder of the injection molding machine, and then driven by the injection molding machine...

There are generally three types of quick mold clamping systems for injection molds: electromagnetic clamping systems, hydraulic clamping systems, and mechanical manual clamping systems. The characteristics of each quick mold clamping system determine their scope of application. 1. Electromagnetic clamping...