FAQ

Consider the process and structural parameters of the plastic mold forming machine

Consider the process and structural parameters of the plastic mold forming machine
45Views
  • 1. Parting surface, that is, the contact surface between the concave mold and the convex mold when the plastic mold is closed. The choice of its location and form is affected by factors such as product shape and appearance, wall thickness, molding method, post-processing technology, mold type and structure, demolding method and molding machine structure.
  • 2. Structural parts, that is, sliders, inclined tops, straight top blocks of complex molds, etc. The design of structural parts is very critical, which is related to the life of the mold, the processing cycle, cost, product quality, etc., so the design of the core structure of complex molds requires the designer’s comprehensive ability to be higher, and is as simple as possible, more durable, and more economical. Design.
  • 3. The accuracy of the mold, that is, card avoidance, precise positioning, guide posts, positioning pins, etc. The positioning system is related to the appearance quality of the product, the quality and life of the mold. According to the different mold structures, different positioning methods are selected. The positioning accuracy control mainly depends on the processing. The internal mold positioning is mainly considered by the designer to design a more reasonable and easy to adjust positioning. the way.
  • 4. Pouring system, that is, the feed channel from the nozzle of the injection molding machine to the cavity, including the main channel, the branch channel, the gate and the cold cavity. In particular, the location of the gate should be selected to facilitate the molten plastic to fill the cavity under good flow conditions. (Except Daomo).
  • 5. Plastic shrinkage and various factors that affect the dimensional accuracy of products, such as mold manufacturing and assembly errors, mold wear, etc. In addition, when designing compression molds and injection molds, the matching of the process and structural parameters of the molding machine should also be considered.

Leave a Reply