- Mould manufacturingshould pay attention to the concise process preparation and detailed expression, and the processing content should be expressed numerically as much as possible;
- At the key and difficult points of processing, the process should be specially emphasized;
- The combination processing office is required, and the process is clearly expressed;
- When the inserts need to be processed separately, pay attention to the technological requirements of the processing accuracy;
- After the combined processing, the insert parts that need to be processed separately are installed, and the benchmark requirements for the separate processing are installed during the combined processing;
- The spring is the most susceptible to damage in mouldprocessing, so choose a mouldspring with a long fatigue life.
318Views
Which factors affect the excellent electroplating quality of zinc alloy die castings?
For zinc alloy die castings to be electroplated surface treatment, this link is very important. If the electroplating is not...
Advantages of ABS plastic hand plate
1. As one of the most widely used plastics, ABS has good impact resistance, heat resistance, low temperature resistance, and...
Application of UHMWPE
As UHMWPE has many excellent properties, it has shown great advantages in the high-performance fiber market, including from offshore oilfield...
Features of Teflon Spray Machining
Teflon spraying process brings the benefits of the surface of the working parts. To a certain extent, Teflon spraying brings...
Application of PPS
Because PPS has good heat resistance, excellent mechanical properties, and good chemical stability and water resistance., PPS processed products are...
