Because of the density unevenness of the green compact obtained during pressing, the possibility of preparing large titanium compacts by molding is limited. Therefore, molding can only make compacts of small titanium products. In titanium and titanium alloy powders, in...

In industrial production, the degree of oxidation of titanium alloy rods may vary greatly. If the oxidation of the previous process is serious, if it is severely oxidized under high temperature conditions and becomes a scale, it must be sandblasted....

Resin bond grinding wheel Generally, the most widely used cutting discs and polishing discs use resin binders. It is characterized by high bonding strength, easy operation, good elasticity, and a certain polishing effect. Because the resin is not resistant to...

The major domestic mold user industries in my country will continue to develop at a relatively rapid rate, and plastic molds will also continue to develop at a high speed. China Mold Network pointed out that the main problems currently...

Difference: In addition to carbon, carbon steel generally contains a small amount of silicon, manganese, sulfur, and phosphorus, while iron does not. Carbon steel is iron. In fact, iron is steel. In the past, traditionally speaking, iron was divided into...

Deformed Inconel 625 refers to a type of alloy that can be hot and cold deformed and has an operating temperature range of -253 to 1320 ° C. It has good mechanical properties and comprehensive strength and toughness indicators, and...

Inconel625 containing no or less aluminum or titanium is generally smelted by electric arc furnace or non-vacuum induction furnace. Inconel 625 with high aluminum and titanium content is not easy to control when smelting in the atmosphere, and gas and...

Inconel 625 applications: The softened and annealed low-carbon alloy 625 is widely used in the chemical process industry. Its good corrosion resistance and high strength make it a thinner structural component. Alloy 625 can be used in applications that come...

Inconel 625 is a face-centered cubic lattice structure. When kept at about 650 ℃ for a long enough time, carbon particles and unstable quaternary phase will be precipitated and converted into stable Ni3 (Nb, Ti) orthorhombic lattice phase. After solid...

1. This machine is a special machine designed for plastic molds or large and heavy shaped workpieces. 2. It can be installed with movable trolley and turntable, only need to put the workpiece on the trolley turntable during operation, and...